Replacing keyboard and mouse function

Put the disc into CD-ROM. Auto-run and press “SETUP” to finish the driver installation.

 1 Connect the joystick USB port to your computer

 2. Press “Start-Set up-Control Panel-GAME CONTROLLER” (Pic-1)

 （1）

3.Choose Controller, press “Attribute” and enter into the Function Test page. (Pic-2)

 In this page you can test all basic function keys, X,Y,Z axis and the function of replacing keyboard and mouse (the details will be explained in the following “Replacing keyboard and mouse”).

 Adjust axis in the “Calibration Function” page, you can press “Default” back to the original setting or press “set” to move to the standard setting.(Pic-3)

 Press Vibration Test to test mortors and vibrating function (pic-4)

（2） （3） （4）

Replacing Keyboard and mouse function hidden in the page of “Function Test” is a brand-new function of this driver. The details as below:

1.Press“Keybard&Mouse setting”to enter into the setting page( Pic-5)

2.Choose “Keybard&Mouse Mode” to set the joystick button and POV cap to replace keyboard and mouse.

3.Choose “Swap axis” to exchange X,Y replacing mouse direction. Press mouse speed to control the moving speed .(pic-6) 

 （5）    （6）

EXP: Take Key 1 as an EXP, let it replace key “A” function in the keyboard. Details as below:

At Pic-6, choose “Keyboard key” in the drop menu turning to pic-7,and press button “A” ,then press OK.

Now the “:key 1” in the joystick have the same function as “A” in the keyboard.

（7）